TurboJohn LLC © 2024
Designed by TurboJohn LLC © 2024

The RaceQuip VESTA20 CARBON Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. The VESTA20 design is a bold departure from traditional auto racing helmet styling and now it’s lighter than ever. A uniquely shaped chin bar supports a scalloped faceshield design. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber. The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip VESTA20 CARBON Helmet is suitable for use in all forms of motorsports. The rear exhaust vents and comfort fit blended Nomex® interior help to keep your scalp cool.  Additionally, an extra set of thicker cheek pads are included to allow a customized fit. All these features are wrapped in a bold design lightweight Carbon composite shell and the result is the outstanding value delivered by the RaceQuip VESTA20 CARBON Helmet. Available in sizes Small – 2XL.

The RaceQuip PRO20 CARBON TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield though molded vents above the eyebrows. The forced air cools your face and airways and also keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber. The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 CARBON TOP AIR Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior helps keep your scalp cool.  All these features are wrapped in a stylish aero design lightweight Carbon composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 CARBON Top Air helmet. Available in sizes Small – 2XL

The RaceQuip PRO20 CARBON Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber.The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 CARBON Helmet is suitable for use in all forms of motorsports. The rear exhaust vents and comfort fit blended Nomex® interior help to keep your scalp cool.  All these features are wrapped in a stylish aero design lightweight Carbon composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 CARBON Helmet. Available in sizes Small – 2XL.

The RaceQuip PRO20 CARBON SIDE AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The left side manifold design utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold across the faceshield from left to right.The forced air cools your face and airways and also keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber.The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 CARBON SIDE AIR Helmet is suitable for use in all forms of motorsports. The rear exhaust vents and comfort fit blended Nomex® interior help to keep your scalp cool.  All these features are wrapped in a stylish aero design lightweight Carbon composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 CARBON SIDE AIR Helmet. Available in sizes Small – 2XL