Lil' Factory in the woods

Call the Order Desk: 803-732-0937 or 800-247-4260 Fax: 803-732-9921 Address: 118 Tiger Paw Lane Irmo, SC 29063 Please call before showing up or E-Mail

Free Freight Policy
Clearance Sale
Helmet Flea Market
Helmets
Helmet Accessories
Head and Neck Device
Driver Suits
Underwear
AlpineStars
Driver Cooling
Gloves
Shoes
Corner Worker and Crewwear
Belts and Harnesses
Window Nets
Race Car
Gauges and Panels
Tire Gauges
Oils and Chemicals
Pit Gear
Karting and Jr Dragster
Used Car Lot

Over Half of Trackside Tim's Staff have Experience as Drivers and Officials!

Trackside Tim's Strives to use American Material Whenever Possible!

Trackside Tim's © 2021
Designed by TurboJohn © 2021

   
 Kamlock Belts 
Home : Belts and Harnesses : Kamlock Belts
JR CAMLOCK 5PT SEAT `BELTS BLACK 179.94
Track Price $179.94 Web $149.95 17% off Select

RaceQuip’s Jr. Dragster / Quarter Midget 5-Point Camlock Harness System features twin individual shoulder belts and has an SFI 16.2 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This motorsports seat belt system also has a "pull-up" lap belt design which means you pull the lap belt ends toward the cam buckle to tighten the belts. The camlock buckle stays attached to the crotch strap so it is out of the way when not in use. This auto racing harness is manufactured using premium 2" polyester webbing with rounded edges, and double-adjustable hardware ends to ease installation. Mounting is either wrap around or bolt-in and the harness set comes with drop-forged steel 3 bar slide and bolt on hardware ends. Shoulders adjust from 15" to 40" and lap belt adjusts from 22" to 60". Not for adult use in a full size racecar. NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black, red, blue, purple and pink - one "set" of seat belts equals one seat.


SFI CAMLOCK 5PT PD LAP SEAT BELTS BLK 179.94
Track Price $179.94 Web $149.95 17% off Select

RaceQuip’s 5-Point Camlock Harness System features twin individual shoulder belts and carries an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This motorsports seat belt system also has a "pull down" lap belt design which means you pull the lap belt ends away from the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. This auto racing harness is manufactured using premium 3" polyester webbing and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black, red, blue, or green - one "set" of seat belts equals one seat.


SFI CAMLOCK 5PT PU LAP SEAT BELTS BLK 179.94
Track Price $179.94 Web $149.95 17% off Select

RaceQuip’s 5-Point Camlock Harness System features twin individual shoulder belts and carries an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This motorsports seat belt system also has a "pull up" lap belt design which means you pull the lap belt ends toward the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. This auto racing harness is manufactured using premium 3" polyester webbing and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black or red - one "set" of seat belts equals one seat.


SFI CAMLOCK 6PT PD LAP SEAT BELTS BLK 191.94
Track Price $191.94 Web $159.95 17% off Select

RaceQuip’s 6-Point Camlock Harness System features twin individual shoulder belts and carries an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This motorsports seat belt system also has a "pull down" lap belt design which means you pull the lap belt ends away from the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. The dual crotch belt has two ends for mounting, but uses only one mounting tab going into the cam buckle. This auto racing harness is manufactured using premium 3" polyester webbing and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". Available in black or red. NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black or red - one "set" of seat belts equals one seat.


SFI CAMLOCK 6PT PU LAP SEAT BELTS BLK 191.94
Track Price $191.94 Web $159.95 17% off Select

RaceQuip’s 6-Point Camlock Harness System features twin individual shoulder belts, a dual sub strap, and carries an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This motorsports seat belt system also has a "pull up" lap belt design which means you pull the lap belt ends toward the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. This auto racing harness is manufactured using premium 3" polyester webbing and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black or red - one "set" of seat belts equals one seat.


SFI CAMLOCK 5PT PD LAP HNR SEATBELTS BLK 224.94
Track Price $224.94 Web $179.95 20% off Select

RaceQuip’s 5-Point Pull Down Camlock Harness System features twin individual HANS / HNR style shoulder belts and has an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This 5-pt HANS / HNR seat belt system also has a "pull down" lap belt design which means you pull the lap belt ends away from the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. This auto racing harness is manufactured using premium 3" polyester webbing that reduces to 2" above the shoulder adjusters, and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black or red - one "set" of seat belts equals one seat.


SFI CAMLOCK 6PT PD LAP HNR SEATBELTS BLK 237.44
Track Price $237.44 Web $189.95 20% off Select

RaceQuip’s 6-Point Pull Down Camlock Harness System features twin individual HANS / HNR style shoulder belts and has an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This 6-pt HANS / HNR seat belt system also has a "pull down" lap belt design which means you pull the lap belt ends away from the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. The dual crotch belt has two ends for mounting, but uses only one mounting tab going into the cam buckle. This auto racing harness is manufactured using premium 3" polyester webbing that reduces to 2" above the shoulder adjusters, and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black or red - one "set" of seat belts equals one seat.


SFI CAMLOCK 6PT PU LAP HNR SEATBELTS BLK 237.44
Track Price $237.44 Web $189.95 20% off Select

RaceQuip’s 6-Point Pull Up Camlock Harness System features twin individual HANS / HNR style shoulder belts and has an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This 6-pt HANS / HNR seat belt system also has a "pull up" lap belt design which means you pull the lap belt ends toward the cam buckle to tighten the belts. The cam buckle stays attached to the right side lap belt when not in use. The dual crotch belt has two ends for mounting, but uses only one mounting tab going into the cam buckle. This auto racing harness is manufactured using premium 3" polyester webbing that reduces to 2" above the shoulder adjusters, and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black, red or green - one "set" of seat belts equals one seat.


SFI CAMLOCK 5PT DRAGSTER "U" BELTS BLK 191.94
Track Price $191.94 Web $159.95 17% off Select

The RaceQuip U-Style Dragster SFI 16.1 Rated Camlock Harness set provides the best value in a purpose-built rail dragster seat belt set. Sometimes called a 4-point configuration, the shoulder harness is one continuous 3" belt that wraps around the belt bar behind the driver's head in a rail type dragster chassis. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. The cam buckle stays connected to the crotch strap to keep it out of the way when not in use. This motorsports seat belt system also features a "pull up" lap belt design which means you pull the lap belt ends toward the cam buckle to tighten the belts. This auto racing harness is manufactured with premium 3" polyester webbing and double-adjustable ends to help ease installation. Mounting of the lap belt and crocth strap is either wrap around or bolt-in with the included drop-forged steel hardware ends. Shoulders adjust from 20" to 40" and lap belt adjusts from 20" to 60". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. Available in black and red - one "set" of seat belts equals one seat.


FIA CAMLOCK 6PT PULL DN LAP BLACK 299.94
Track Price $299.94 Web $249.95 17% off Select

RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These FIA Pull-Down Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six (6) point configuration incorporates a comfortable dual 2" wide moustache bar crotch strap design that is adjustable to 24" in length. The lap belt is a "pull-down" configuration which means that you pull the lap belt straps down and away from the cam buckle to tighten. The 3" wide lap belt is adjustable from 22" to 60" in length and has sewn ends with snap hooks and eyebolts installed. The individual shoulder belts are 3" wide and can be adjusted from 20" to 68" in length. This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five (5) years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? left or right and 11? up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 40? (right or left) unlatch movement without fear of accidental opening. The camlock buckle stays attached to the crotch strap so it is out of the way when entering and exiting the racecar. Next, the black oxide coated drop-forged steel hardware is sewn onto the premium polyester webbing. RaceQuip calls their soft and supple proprietary blend polyester webbing “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with wide easy lift handles. The lap belt adjusters utilize an anti-slip tensioner device to keep the belt tension consistent. The shoulder and crotch straps are "double adjustable", so belt lengths can be simply adjusted on either end for ease of installation. Using the included three bar slides, you can mount the shoulder belts and crotch straps by either wrapping them around a rollbar or by snapping them in place with the supplied snap hook ends and eyebolts. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip racing seat belts - otherwise serious injury or death may occur during an impact. Available in black or red - one "set" of seat belts equals one seat.


FIA CAMLOCK 6PT PULL UP LAP BLACK 299.94
Track Price $299.94 Web $249.95 17% off Select

RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These FIA Pull-Up Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six (6) point configuration incorporates a comfortable dual 2" wide moustache bar crotch strap design that is adjustable to 24" in length. The lap belt is a "pull-up" configuration which means that you pull the lap belt straps up and towards the cam buckle to tighten. The 3" wide lap belt is adjustable from 22" to 60" in length and has sewn ends with snap hooks and eyebolts installed. The individual shoulder belts are 3" wide and can be adjusted from 20" to 68" in length. This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five (5) years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? left or right and 11? up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 40? (right or left) unlatch movement without fear of accidental opening. The camlock buckle stays attached to the crotch strap so it is out of the way when entering and exiting the racecar. Next, the black oxide coated drop-forged steel hardware is sewn onto the premium polyester webbing. RaceQuip calls their soft and supple proprietary blend polyester webbing “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with wide easy lift handles. The lap belt adjusters utilize an anti-slip tensioner device to keep the belt tension consistent. The shoulder and crotch straps are "double adjustable", so belt lengths can be simply adjusted on either end for ease of installation. Using the included three bar slides, you can mount the shoulder belts and crotch straps by either wrapping them around a rollbar or by snapping them in place with the supplied snap hook ends and eyebolts. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip racing seat belts - otherwise serious injury or death may occur during an impact. Available in black or red - one "set" of seat belts equals one seat.


FIA CAMLOCK 6PT PULL UP LAP FHR BLACK 347.94
Track Price $347.94 Web $289.95 17% off Select

RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These FIA HANS Shoulder Pull-Up Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six (6) point configuration incorporates a comfortable dual 2" wide moustache bar crotch strap design that is adjustable to 24" in length. The lap belt is a "pull-up" configuration which means that you pull the lap belt straps up and towards the cam buckle to tighten. The 3" wide lap belt is adjustable from 22" to 60" in length and has sewn ends with snap hooks and eyebolts installed. The individual shoulder belts transition from 3" wide below the adjuster to 2" wide above to accomodate a HANS or other Forward Head Restraint device. Shoulder lengths can be adjusted from 20" to 68" . This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five (5) years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? left or right and 11? up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 40? (right or left) unlatch movement without fear of accidental opening. The camlock buckle stays attached to the crotch strap so it is out of the way when entering and exiting the racecar. Next, the black oxide coated drop-forged steel hardware is sewn onto the premium polyester webbing. RaceQuip calls their soft and supple proprietary blend polyester webbing “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with wide easy lift handles. The lap belt adjusters utilize an anti-slip tensioner device to keep the belt tension consistent. The shoulder and crotch straps are "double adjustable", so belt lengths can be simply adjusted on either end for ease of installation. Using the included three bar slides, you can mount the shoulder belts and crotch straps by either wrapping them around a rollbar or by snapping them in place with the supplied snap hook ends and eyebolts. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip racing seat belts - otherwise serious injury or death may occur during an impact. Available in black or red - one "set" of seat belts equals one seat.


FIA CAMLOCK 6PT 2" PULL DN LAP FHR BLK 359.94
Track Price $359.94 Web $299.95 17% off Select

RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These FIA HANS Shoulder Pull-Down 2" Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. This seat belt set could be called an "endurance racing" version due to the fact that the crotch straps are easily adjustable and all the other adjusters have easy pull handles. There are also loops on the shoulder harnesses to attach bungee cords or the like, in order to pull the belts up and away when they are disconnected. All of these features allow for quicker co-driver changes during an endurance race. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six (6) point configuration incorporates a comfortable dual 2" wide moustache bar crotch strap design that is adjustable to 24" in length. The lap belt is a 2" wide "pull-down" configuration which means that you pull the lap belt straps down and away from the cam buckle to tighten. The 2" wide lap belt is adjustable from 22" to 60" in length and has sewn ends with snap hooks and eyebolts installed. Many racers feel that a 2" lap belt allows them to sinch down the belts more securely due to the fact that the belt rides below the iliac crest (hip bone). The individual shoulder belts transition from 3" wide below the adjuster to 2" wide above to accomodate a HANS or other Forward Head Restraint device. Shoulder lengths can be adjusted from 20" to 68" . This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five (5) years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? left or right and 11? up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 40? (right or left) unlatch movement without fear of accidental opening. The camlock buckle stays attached to the crotch strap so it is out of the way when entering and exiting the racecar. Next, the black oxide coated drop-forged steel hardware is sewn onto the premium polyester webbing. RaceQuip calls their soft and supple proprietary blend polyester webbing “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with wide easy lift handles. The lap belt adjusters utilize an anti-slip tensioner device to keep the belt tension consistent. The shoulder and crotch straps are "double adjustable", so belt lengths can be simply adjusted on either end for ease of installation. Using the included three bar slides, you can mount the shoulder belts and crotch straps by either wrapping them around a rollbar or by snapping them in place with the supplied snap hook ends and eyebolts. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip racing seat belts - otherwise serious injury or death may occur during an impact. Available in black or red - one "set" of seat belts equals one seat.


FIA CAMLOCK 6PT 2" PULL UP LAP FHR BLK 335.94
Track Price $335.94 Web $279.95 17% off Select

RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These All 2" FIA Pull-Up Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six (6) point configuration incorporates a comfortable dual 2" wide moustache bar crotch strap design that is adjustable to 24" in length. The 2" wide lap belt is adjustable from 22" to 60" in length and has sewn ends with snap hooks and eyebolts installed. Many racers feel that a 2" lap belt allows them to sinch down the belts more securely due to the fact that the belt rides below the iliac crest (hip bone). The lap belt is a "pull-up" configuration which means that you pull the lap belt straps up and towards the cam buckle to tighten. The individual shoulder belts are 2" wide for use with a HANS/HNR device and can be adjusted from 20" to 82" in length. This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five (5) years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? left or right and 11? up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 40? (right or left) unlatch movement without fear of accidental opening. The camlock buckle stays attached to the crotch strap so it is out of the way when entering and exiting the racecar. Next, the black oxide coated drop-forged steel hardware is sewn onto the premium polyester webbing. RaceQuip calls their soft and supple proprietary blend polyester webbing “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with wide easy lift handles. The lap belt adjusters utilize an anti-slip tensioner device to keep the belt tension consistent. The shoulder and crotch straps are "double adjustable", so belt lengths can be simply adjusted on either end for ease of installation. Using the included three bar slides, you can mount the shoulder belts and crotch straps by either wrapping them around a rollbar or by snapping them in place with the supplied snap hook ends and eyebolts. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip racing seat belts - otherwise serious injury or death may occur during an impact. Available in black or red - one "set" of seat belts equals one seat.


FIA 6PT PULL UP LAP FHR FORMULA SUB BLK 359.94
Track Price $359.94 Web $299.95 17% off Select

RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These All 2" FIA Pull-Up Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six (6) point configuration incorporates two comfortable individual "Euro Style" sub strap belts. The Euro Style sub straps pass through a ring on the lap belt and then loop around the shoulder belt attachment to the buckle. This design places more of the sub strap over the thigh which is recommended for lay down driver configuartions like a formula car or sport racer. The 2" wide lap belt is adjustable from 28" to 56" in length and has sewn ends with bolt on tabs installed. Many racers feel that a 2" lap belt allows them to sinch down the belts more securely due to the fact that the belt rides below the iliac crest (hip bone). The lap belt is a "pull-up" configuration which means that you pull the lap belt straps up and towards the cam buckle to tighten. The individual shoulder belts are 2" wide for use with a HANS/HNR device and can be adjusted from 20" to 52" in length. This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five (5) years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? left or right and 11? up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 40? (right or left) unlatch movement without fear of accidental opening. The camlock buckle stays attached to the right side lap belt so it is out of the way when entering and exiting the racecar. Next, the black oxide coated drop-forged steel hardware is sewn onto the premium polyester webbing. RaceQuip calls their soft and supple proprietary blend polyester webbing “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder and lap adjusters with easy lift handles. The lap belt adjusters utilize an anti-slip tensioner device to keep the belt tension consistent. The shoulder and crotch straps are "double adjustable", so belt lengths can be simply adjusted on either end for ease of installation. You can mount the shoulder belts and crotch straps by bolting them in with the supplied hardware, or you may wrap them around a rollbar or snap them in place by using our optional snap hook ends and eyebolts. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip racing seat belts - otherwise serious injury or death may occur during an impact. Available in black or red - one "set" of seat belts equals one seat.