TurboJohn LLC © 2024
Designed by TurboJohn LLC © 2024

• Seamless cross-linked polyethylene shell
• Molded-in 1/4"-20 threaded mounting inserts
• 1/4" barbed inlet fitting in the top
• 1/4" barbed lever handle petcock in the bottom
• Meets all sanctioning organizations requirements for a 1 quart overflow

JOES Vent Tanks are ideal for transmissions, rear ends or small engines. They have an internal baffle to keep fluids from blowing into the filter. #8 AN threads are at the bottom for your choice of hose fitting. Mounts to 1-1/2" tubing.

JOES Vent Tanks are ideal for transmissions, rear ends or small engines. They have an internal baffle to keep fluids from blowing into the filter. 1/4" NPT threads are at the bottom for your choice of hose fitting. Mounts to 1-1/2" tubing.

JOES Vent Tanks are ideal for transmissions, rear ends or small engines. They have an internal baffle to keep fluids from blowing into the filter. #8 AN threads are at the bottom for your choice of hose fitting. Mounts to 1-3/4" tubing.

JOES Vent Tanks are ideal for transmissions, rear ends or small engines. They have an internal baffle to keep fluids from blowing into the filter. 1/4" NPT threads are at the bottom for your choice of hose fitting. Mounts to 1-3/4" tubing.

JOES Vent Tanks are ideal for transmissions, rear ends or small engines. They have an internal baffle to keep fluids from blowing into the filter. 1/4" NPT threads are at the bottom for your choice of hose fitting. Mounts to flat sheet metal.

JOES Kart Vent Tank has a panel mount for quick and easy mounting on your kart. The compact tank includes a hose barb fitting and has a drain valve for removal of fluids.

Allstar Performance clamp-on breathers are ideal for use on transmissions and differentials. They are easy to mount and are offered for 1 1/2 in. or 1 3/4 in. tubing.

Aluminum breather tanks are 11-1/2" x 3", include mounting bracket, clamp on breather element, drain, and one or two 3/8"NPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends.

Aluminum breather tanks are 11-1/2" x 3", include mounting bracket, clamp on breather element, drain, and one or two 3/8"NPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends.

Shielded or non-shielded clamp-on breathers may be used on valve covers with breather tubes.

Shielded or non-shielded clamp-on breathers may be used on valve covers with breather tubes.

Clamp-on design - No Welding Required

Available with bracket for 1 3/4" or 1 1/2" roll bars. Please select size above when ordering.

• Includes vent, hardware and hose for a complete installation
• Quick professional installation
• Clamp on design, no welding required
• 1/4" NPT
• Available with bracket for either 1 3/4" or 1 1/2" roll bars (Please choose above when ordering)