Lil' Factory in the woods

Call the Order Desk: 803-732-0937 or 800-247-4260 Fax: 803-732-9921 Address: 118 Tiger Paw Lane Irmo, SC 29063 Please call before showing up or E-Mail

Free Freight Policy
Clearance Sale
Helmet Flea Market
Helmets
Helmet Accessories
Head and Neck Device
Driver Suits
Underwear
AlpineStars
Driver Cooling
Gloves
Shoes
Corner Worker and Crewwear
Belts and Harnesses
Window Nets
Race Car
Gauges and Panels
Tire Gauges
Oils and Chemicals
Pit Gear
Karting and Jr Dragster
Used Car Lot

Over Half of Trackside Tim's Staff have Experience as Drivers and Officials!

Trackside Tim's Strives to use American Material Whenever Possible!

Trackside Tim's 2018
Designed by TurboJohn 2018

   
 Seats 
Home : Racecar : Seats
2-Part Foam for Seat Fitting, Two Quart Kit
Track Price $69.95 Web $65.00 7% off Buy Online
Part # SEAT-FOAM

This polyurethane foam kit produces a rigid foam with a density of about two pounds per cubic foot. It is ideal for making custom fitted seats or for strengthening composite bodywork parts. When the two parts are mixed, they begin to react within about one minute. Most of the foaming occurs within the next several minutes. About 15 minutes is required for the foam to set. Allow several hours before any secondary operations are attempted such as sanding or carving (if required). The resulting foam will not absorb water and is not affected by polyester resin, epoxy resin, gasoline or oil. The compressive strength of the foam is 36 psi. It can withstand operating temperatures of up to 200F. One kit is enough for about 3 typical formula car seat inserts.

Click here for an instructional article about Custom Fit Seat Inserts, including full instructions for this kit.

Ground Shipment only


Seat Back Brace - Quick Adjust, I/O Port
Track Price $129.95 Buy Online
Part # SBB15

The I/O Port Racing Supplies Seat Back Brace has met with approval by SCCA, IMSA, NASA, BMW CCA and other sanctioning body's scrutinizers. Our new updated aluminum units are designed to bolt to the back of the seat and clamp to the roll bar, no welding required.

The unique clamp will fit roll bar tubing from 1-1/4" to 1-3/4" in diameter. Our quick-pin brace adjusts from 2-1/2" up to 15" making the brace ideal for multi-driver cars. The plate that bolts to the back of the seat is 2-1/2" x 8" for a total of 20 square inches. This brace can be used with just about any aluminum or composite seat at any angle. For fore or aft adjustments...just pull a pin, slide the seat and reinstall the pin. For other adjustments the brace can be loosened so that the seat can be tilted or moved up or down, and the brace then re-tightened.

SCCA, NASA, BMW CCA Club Racing, and IMSA require such braces on all non-FIA-rated seats. Please note: the design of the brace requires you to drill holes in the back of the seat and attach the bracket to the seat. Drilling holes and attaching a brace to a composite seat may void the seat warranty and/or the FIA-rating. Check with your seat manufacturer and sanctioning body rules. Installing this brace to an aluminum seat will not void any warranties and will comply with racing rules. Installation instructions and all mounting hardware are included.

  • All aluminum design
  • Clamps to tubing from 1-1/4" to 1-3/4" in diameter
  • No welding required
  • Adjusts from 2-1/2" up to 15"
  • Made in the USA


47 Series - Intermediate Road Race Clearance
Track Price $409.00 Web $299.00 27% off Buy Online
Part # KIRK-47000

Our Intermediate Road Race Layback seat is designed especially for entry level road course cars. It has the same quality construction as our Deluxe seat at an affordable price. This seat is very comfortable making it ideal for endurance events.

  • Constructed from TIG welded .125" thick 5052 grade aluminum.
  • MIG welded inside for added strength.
  • A true road race design with built in shoulder support.
  • Aluminum extrusion around perimeter for extra strength and safety.
  • Machined edges eliminate rubber molding on seat belt holes.
  • Entire seat is padded with high density foam for extra comfort and support.
  • Contoured head rest is designed to cup helmet.
  • Extra support at rib height provides support for high G force cornering but is designed to not interfere with shifting.


Intermediate 20 Degree Layback Double Rib Support Seat - 36 Series Clearance
Track Price $275.00 Web $199.00 28% off Buy Online
Part # KIRK-36000

  • Our Intermediate DOUBLE RIB SUPPORT 20 Degree Layback seat is designed especially for all dirt and asphalt late models and all IMCA modifieds. The Internediate seat is a great value for the professional and amateur alike who demands the best in safety and comfort. And it's manufactured with the same quality and high grade mateirals as our Deluxe Seats.
  • TIG welded .125" thick 5052 grade aluminum
  • MIG welded inside for added strength
  • Offset aluminum extrusion around perimeter of seat adds extra strength and safety
  • Progressive rib bead adds extra strength
  • Seat bottom contoured in rear for multi-angled seat position mounting and raised in front for thigh support
  • Multi-position lap belt openings for easy mounting.
  • Submarine belt opening is standard. Machined edges eliminate rubber moulding
  • Contoured high density foam bottom provides complete leg and inner thigh support
  • Extra thick, high density foam on rib supports for comfort and safety


Adjustable Seat Brace for 1 1/2" Roll Bar
Track Price $109.95 Buy Online
Part # AP-90190

Allows quick and easy movement of your driver's seat for proximity to controls or seat angle.

  • SCCA approved for competition.
  • Attaches to horizontal harness mount tube with no welding.


Adjustable Seat Brace for 1 3/4" Roll Bar
Track Price $109.95 Buy Online
Part # AP-90191

Allows quick and easy movement of your driver's seat for proximity to controls or seat angle.

  • SCCA approved for competition.
  • Attaches to horizontal harness mount tube with no welding.